How to Read a Knitting Chart: A Worked Example, Row by Row

A knitting chart looks like a crossword puzzle and feels like one the first time you meet it. But charts are not a code to crack — they are a picture of your knitting, drawn one stitch per square. Once you know the handful of symbols and the two reading-direction rules, a chart is often easier than written instructions, because you can see the pattern forming instead of decoding a paragraph. This post works through one small chart row by row, so you can follow along and see exactly how it works.
A Chart Is a Picture of Your Knitting
A chart is a grid. Each square stands for one stitch, and each horizontal line of squares is one row of knitting. The symbol inside a square tells you what to do with that stitch. The most important idea is the one that confuses beginners: each symbol shows the finished stitch as seen from the front of the work. A square with a knit symbol means the stitch looks like a knit stitch from the front — which, on a wrong-side row, means you purl it, since a purl worked from the back shows as a knit V on the front of the fabric.
Every chart comes with a key (legend) that lists its symbols. Read the key first, before the chart itself — symbols are mostly standard, but individual designers sometimes vary them, and the key is the authority for that chart. The Craft Yarn Council publishes the standard symbol set most designers use: Craft Yarn Council knit chart symbols.
The Symbols You Will Meet First
Most beginner charts use only a few symbols. These six cover nearly every simple lace and texture chart:
| Symbol | Meaning (as seen from the front) | What you do on a right-side row | What you do on a wrong-side row |
|---|---|---|---|
| Blank square | Knit stitch | Knit | Purl |
| Dot (•) | Purl stitch | Purl | Knit |
| O | Yarn over | Yarn over | Yarn over |
| / | Knit two together (k2tog, leans right) | K2tog | Purl two together |
| \ | Slip, slip, knit (ssk, leans left) | Ssk | Ssp (slip, slip, purl) |
| Grey square | No stitch — skip this square | Skip | Skip |
The "no stitch" square is the one that confuses people. It appears in charts where the stitch count changes from row to row — lace, for example — and it means there is no stitch there on that row. You simply skip over it and move to the next square. It is a placeholder that keeps the chart's columns lined up, nothing more.
Worked Example: An 8-Stitch Lace Repeat
Here is a small chart for a simple eyelet pattern, 8 stitches wide and 4 rows tall. In the table below, K is a blank square (knit), O is a yarn over, / is k2tog, and S is ssk. The chart is printed the way charts are printed: the last row at the top, the first row at the bottom.
| Row | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
|---|---|---|---|---|---|---|---|---|
| 4 (WS) | K | K | K | K | K | K | K | K |
| 3 (RS) | K | K | O | S | / | O | K | K |
| 2 (WS) | K | K | K | K | K | K | K | K |
| 1 (RS) | K | O | S | K | K | / | O | K |
Now read it row by row, starting at the bottom:
- Row 1 (right side), read right to left: knit 1, yarn over, ssk, knit 2, k2tog, yarn over, knit 1. The two yarn overs add two stitches and the two decreases remove two, so the count stays at 8 — a good check that you read the row correctly.
- Row 2 (wrong side), read left to right: purl all 8 stitches. The chart shows knit symbols, but on a wrong-side row a knit symbol means purl.
- Row 3 (right side), read right to left: knit 2, yarn over, ssk, k2tog, yarn over, knit 2. Again the increases and decreases balance.
- Row 4 (wrong side), read left to right: purl all 8 stitches.
Then repeat all four rows. After two repeats you will see the eyelets forming in a diamond pattern — and you will understand why chart knitters prefer charts: the picture shows you the pattern, so a mistake stands out immediately. If your eyelets are not lining up in diamonds, you have misread a row, and the chart shows you exactly where.
Reading Direction, Simply
Two rules, and they never change for flat knitting:
- Start at the bottom-right corner. The lowest row is the first row you knit, and you begin at its right-hand end.
- Right-side rows go right to left; wrong-side rows go left to right. That is simply the direction your knitting travels: on a right-side row you knit from the right needle to the left, and on a wrong-side row you work back the other way.
In the round, it is simpler still. When you knit in the round, every round is a right-side round — you never turn the work. So every row of the chart is read right to left, and a knit symbol always means knit. If a pattern gives a chart for a hat or a sock knitted in the round, ignore the wrong-side rule entirely.
Repeats and the Heavy Box
Many charts mark a repeat with a heavy border or a boxed section. The boxed stitches are the repeat: you work them across the row as many times as your stitch count allows, then work any stitches outside the box (usually edge stitches) once. It is the chart version of the asterisks in written instructions — "repeat from * to *" — and the chart's notes will tell you how the edges work. If your stitch count does not divide evenly by the repeat, check the pattern: it usually tells you how many edge stitches to allow.
When the Chart and the Words Disagree
Some patterns give both a chart and written instructions. If they disagree, do not guess. First, re-read the chart key — a symbol you assumed may mean something else in this chart. Second, check the stitch counts: the row where they diverge is usually the row with the error. Third, check the designer's errata page or the pattern's project notes — published patterns do sometimes contain errors, and the chart is usually the part that was checked most carefully. And if you are still unsure, trust the stitch count: a row that leaves you with the wrong number of stitches has a mistake in it somewhere, whichever version you followed.
Tools That Help
Charts are easier to follow with a little help:
- A highlighter or sticky note under the row you are knitting, moved up after each row. Low-tech and effective.
- A row counter — a small tally you click after each row, so you always know which chart row is next.
- A magnetic board or chart keeper for larger charts, which holds the chart flat and marks your place.
None of these are necessary. Many knitters read charts with nothing but a finger on the row. But for a first chart, a sticky note under the current row removes the most common error: losing your place and knitting the wrong row.
Frequently Asked Questions
How do you read a knitting chart for beginners?
Start at the bottom-right corner: the lowest row is the first row you knit. Each square is one stitch, each symbol shows the stitch as seen from the front, and you read right-side rows right to left and wrong-side rows left to right. Read the chart's key first.
Do you read a knitting chart left to right or right to left?
Both, depending on the row. Right-side rows run right to left; wrong-side rows run left to right. In the round, every row runs right to left, because every round is a right-side round.
What does a blank square mean in a knitting chart?
A knit stitch, as seen from the front of the work. On a right-side row you knit it; on a wrong-side row you purl it — a purl worked from the back shows as a knit V on the front.
How do you read a knitting chart in the round?
Every row is read right to left, and every symbol is worked as it appears — a knit symbol always means knit. There are no wrong-side rows in the round, so the left-to-right rule does not apply.
What does "no stitch" mean on a chart?
It means there is no stitch in that position on that row. The grey "no stitch" square is a placeholder that keeps the chart's columns lined up where the stitch count changes. Skip over it and move to the next square.