German Short Rows: Shape Fabric Without Holes

German short rows are a way of shaping knitted fabric by working partial rows: you turn the work partway across a row, work back, and later resolve the turn so no hole or gap remains. They shape a sock heel, slope a shoulder, or add a bust dart — anywhere a garment needs to be longer in one place than in another — without the holes that older short-row methods left behind.
This page teaches the method step by step: the turn, the double stitch, and the resolution. It does not create a separate broader "short rows" page, because German short rows are the method this site teaches, and the older wrap-and-turn method is covered here only as a comparison.
What Short Rows Are For
Normal knitting works every stitch in every row, so the fabric grows evenly. Short rows break that rule deliberately: by turning early, you add extra rows to part of the fabric and not to the rest. The part with extra rows becomes longer or more curved than the part without.
Common uses:
- Sock heels. Short rows turn the heel from the leg into the foot.
- Shoulder slopes. Short rows shape a shoulder seam so it slopes instead of stepping down in blocks.
- Bust darts. Short rows add length at the front of a garment without adding it at the back.
- Hat and shawl shaping. Short rows add curves and wedges to shawls and hats.
Without short rows, these shapes would need stepped decreases that look blocky. With short rows, the shaping is smooth and gradual.
The German Short Row Method, Step by Step
The German method has three parts: the turn, the double stitch, and the resolution.
Part 1: Work to the Turning Point
Knit (or purl) across the row until the pattern tells you to turn. The turning point is usually given as a stitch count: "knit to 10 stitches before the end, turn." Stop there, with stitches still unworked on the left needle.
Part 2: Turn and Make the Double Stitch
- Turn the work as if you had reached the end of the row.
- Slip the first stitch purlwise (move it to the right needle without working it).
- Pull the working yarn firmly over the top of the needle to the back of the work. This pulls the slipped stitch up and over the needle, so it looks like two stitches — a "double stitch." It is still one stitch, but it shows two legs over the needle.
- Hold the yarn in that pulled position and work the next row back as the pattern instructs. The double stitch stays on the needle, looking like two stitches, until it is resolved.
The firm pull is the key detail. A half-hearted pull makes a loose double stitch that shows as a gap later. Pull firmly enough that the stitch visibly doubles over the needle.
Part 3: Resolve the Double Stitch
On a later row, when the pattern reaches the double stitch, work it as a single stitch: insert the needle through both legs of the double stitch at once and knit (or purl) them together as one. The double stitch becomes one stitch again, and the turn point disappears into the fabric with no hole and no visible step.
That is the whole method. Turn, double, resolve. The reason it works better than older methods is that the double stitch marks its own turning point visibly — you can see exactly where to resolve it — and the resolution closes the gap completely.
German Short Rows vs Wrap and Turn
Wrap and turn is the older short-row method. It works by wrapping the working yarn around the next stitch before turning, then later picking up the wrap and working it together with the wrapped stitch. It works, but it has two drawbacks: the wrap is easy to miss on the resolution row (leaving a hole), and the wrapped stitch can look slightly different from its neighbors.
German short rows avoid both problems: the double stitch is clearly visible, so it is hard to miss, and the resolution makes a normal-looking stitch. For those reasons, most modern patterns specify German short rows, and this site teaches them as the default method. If a pattern says "wrap and turn," follow that pattern's instructions — the methods are not interchangeable mid-project — but for new projects, German short rows are the better default.
Common German Short Row Mistakes
A loose double stitch. Cause: not pulling the yarn firmly enough over the needle after slipping. Fix: pull firmly so the stitch visibly doubles. If a gap appears later, the double stitch was too loose — undo back to the turn and redo it with a firmer pull.
Forgetting to resolve the double stitch. Cause: working past the double stitch as if it were two separate stitches, or skipping it. Fix: when you reach a stitch that looks doubled over the needle, work both legs together as one stitch. Count stitches after the resolution row to confirm the count is right.
Turning at the wrong point. Cause: miscounting stitches before the turn. Fix: count before turning, and place a stitch marker at the turning point if the pattern turns at the same place repeatedly. Markers remove the counting error entirely.
Frequently Asked Questions
What are German short rows in knitting?
German short rows are a shaping method where you turn the work partway across a row, make a "double stitch" by slipping a stitch and pulling the yarn firmly over the needle, then later work both legs of the double stitch together as one. They shape fabric without leaving holes.
How do you do a German short row?
Work to the turning point, turn the work, slip the first stitch purlwise, pull the yarn firmly over the needle to form a double stitch, then work back. On a later row, knit or purl both legs of the double stitch together as one stitch to resolve it.
What is the difference between German short rows and wrap and turn?
Wrap and turn wraps the yarn around the next stitch before turning and later picks up the wrap. German short rows make a double stitch that is easier to see and resolve, and leaves no hole. Most modern patterns prefer German short rows.
Why do my short rows leave holes?
Usually because the double stitch was pulled too loosely, or it was not resolved on the later row. Pull firmly at the turn, and work both legs together when you reach the double stitch again.
When do you use short rows in knitting?
For shaping that needs extra rows in one part of the fabric: sock heels, shoulder slopes, bust darts, and curved shawl or hat sections.